Phase alignment of spectral crossovers

This is a continuation of the impulse response subwoofer thread. Here are some screens from Sounds Systems: Optimaztion and Design that deal with phase alignment of crossovers.

The figure above shows the phase responses brought together between sub and main.  The crossover is not steep and therefore the phase response overlap over a wide range.

The LF and HF components of a 2-way xover

The combined response of a 2-way xover

Explore posts in the same categories: Alignment & Design, Crossover, FFT Analyzers, Sound Systems Book, Tuning Techniques

Tags: , , , , , , ,

You can comment below, or link to this permanent URL from your own site.

3 Comments on “Phase alignment of spectral crossovers”

  1. Steve Says:

    Why does the phase response show positive traces at certain times vs negative traces at others? Is there a true discrepancy between -60 degrees of phase shift vs +60 degrees of phase shift? I don’t know if I am seeing the difference if any, but I am having a difficult time understanding how the averages from the FFT account for this result.

    • 6o6 Says:

      The phase response is a circular function. We set a start time on the circle – and call it 0 degrees. When it comes back around again to 0 we have completed a cycle. Because it is circular you could start the counting anywhere. When se measure a speaker we cannot place the mic close enough to be a the true O degrees point – the mic would crash into the speaker. Therefore we need to set a delay time in the analyzer to start our clock in time with the arrival from the speaker. Since the speaker is not perfect in its phase response we see different values at different freqs. There is a diff between -60 and + 60 degrees – the same as there is a difference between 10 o’clock and 2 o’clock. Although they are both two hours away for noon, they are 4 hours away from each other.
      I hope this helps


  2. Stephen Bryant Says:

    That helps, thank you. I just noticed that boosting frequencies on say a graphic eq causes positive phase shift, while cutting frequencies yield a negative phase response each and every time?


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: